PVC grooved series

Channel Groove Wall Panel

Item no. GDPVCWN260018418

Flat 184 mm boards with a machined channel groove, PVC film over natural MDF. Supplied in full 2600 mm lengths with a tongue & groove joint.

Size184 × 2600 mm
Thickness11/16 in. (≈17.5 mm)
Coverage20.6 sq.ft / carton
InstallGlue / Nail / Staple
5-year residential warranty 85 cartons / pallet
Construction

Wide boards.
Deep shadow lines.

Flat 184 mm boards separated by a machined channel groove, laminated in PVC film over natural MDF. The wider pitch gives a calmer, more architectural rhythm than fine fluting.

Panels run the full 2600 mm height with a tongue & groove joint, so the groove line stays continuous across every board.

  • Full 2600 mm lengths — no short boards breaking the line
  • Tongue & groove joint keeps boards aligned during fixing
  • Wipeable PVC surface, no oiling or sealing required
PVC decorative film0.14 mm — Walnut
Natural MDF core
11/16 in. (≈17.5 mm) — Channel groove
±0.2 mm
Sealed back faceBalanced lamination
Channel groove — consistent panel to panel
Specifications

Technical data

Dimensions & coverage

Board width
7 1/4 in. (184 mm)
Board length
102 3/8 in. (2600 mm)
Board thickness
11/16 in. (≈17.5 mm)
Edge profile
Square ends
Coverage per carton
20.6 sq.ft / carton
Panels per carton
4

Materials & finish

Construction
PVC film + natural MDF
Surface
PVC decorative film, 0.14 mm — flat boards with channel grooves
Profile
Channel groove, tongue & groove joint
Core
Natural MDF
Colorway
Walnut
Warranty
5 yr residential / 2 yr commercial

Installation & application

Joint
Tongue & groove
Fixing method
Glue / Nail / Staple
Application
Interior walls & ceilings
Grade
On / Above
Use area
Indoor, dry areas (40–60% RH)
Acoustic performance
—

Packing & logistics

Cartons per pallet
85
Pallets per container
16
Pallet height
49.21 in.
Box length
102.76 in.
Terms
FOB factory
Country of manufacture
Vietnam
Installation

Watch it go up

Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.

Installation video — GDPVCWN260018418 Reserved video area (16:9). Drop your YouTube / Vimeo iframe here when the video is ready.
Plan & mark

Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.

Cut to size

Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.

Adhesive & fix

Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.

Join panels

Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.

Finish

Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.

Good to know

  • Let panels acclimatize flat for 24–48 h before install.
  • Fix into studs or furring at max. 400 mm centres.
  • Interior use only, dry areas. Indoor RH 40–60%.
Installation guide (PDF)
Downloads

Documents for your file

Everything your team and your customer need to specify this panel.

PDF

Product information sheet GDPVCWN260018418

Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.

Download PDF
PDF

Installation guide 2 pages

Tools, preparation, five-step installation for walls, ceiling notes and care instructions.

Download PDF