Acoustic
Embossed Wall Panel
Item no. YWTRBL260054021Genuine 0.4 mm sliced oak veneer over black MDF in an embossed wave, matte water-based finish, with a PET backing for 60% sound absorption.
Real veneer.
Quiet in both senses.
A genuine 0.4 mm sliced oak veneer pressed into an embossed wave and finished with water-based paint — the grain runs under your hand, not just in the print.
A black MDF core and PET backing keep the panel stable and add measurable sound absorption behind the veneer.
- Real oak veneer, Janka 1360 — hard enough for wall contact
- 60% sound absorption from the PET backing
- Matte water-based finish, 1–3 gloss units
1/2 in. (≈12.7 mm) — Embossed wave texture
Technical data
Dimensions & coverage
- Board width
- 21 1/4 in. (540 mm)
- Board length
- 102 3/8 in. (2600 mm)
- Board thickness
- 1/2 in. (≈12.7 mm)
- Edge profile
- Square edge
- Coverage per carton
- 15.11 sq.ft / carton
- Panels per carton
- 2
Materials & finish
- Construction
- Real oak veneer + black MDF + black PET, water-based paint
- Surface
- Real oak veneer, 0.4 mm sliced — embossed, matte
- Profile
- Embossed wave
- Core
- Black MDF with PET backing
- Colorway
- Black Oak
- Warranty
- 5 yr residential / 2 yr commercial
Installation & application
- Joint
- Overlap joint
- Fixing method
- Glue / Nail / Staple
- Application
- Interior walls & ceilings
- Grade
- On / Above
- Use area
- Indoor, dry areas (40–60% RH)
- Acoustic performance
- 60% sound absorption
Packing & logistics
- Cartons per pallet
- 72
- Pallets per container
- 16
- Pallet height
- 49.21 in.
- Box length
- 102.76 in.
- Terms
- FOB factory
- Country of manufacture
- Vietnam
Watch it go up
Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.
Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.
Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.
Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.
Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.
Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.
Good to know
- Let panels acclimatize flat for 24–48 h before install.
- Fix into studs or furring at max. 400 mm centres.
- Interior use only, dry areas. Indoor RH 40–60%.
Documents for your file
Everything your team and your customer need to specify this panel.
Product information sheet
Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.
Download PDFInstallation guide
Tools, preparation, five-step installation for walls, ceiling notes and care instructions.
Download PDF