Veneer acoustic series

Herringbone Acoustic Panel

Item no. YGPKJ122261009

Veneer slats in a herringbone layout over black PET acoustic backing. 610 × 1222 mm panels, 3/8 in. thin, for walls and ceilings.

Size610 × 1222 mm
Thickness3/8 in. (≈9.5 mm)
Coverage80.24 sq.ft / carton
InstallGlue / Nail / Staple
5-year residential warranty 33 cartons / pallet
Construction

A pattern that
does the talking.

Individual veneer slats pressed in a herringbone layout onto a black PET sheet — the open joints between slats give the panel its acoustic behaviour and its shadow line.

At 610 × 1222 mm each panel covers a generous area, so a full wall needs fewer joints than slat-by-slat systems.

  • Herringbone layout without on-site assembly
  • PET backing for noise reduction
  • Thin 3/8 in. profile — suits walls and ceilings
Tech-wood veneer slats0.3 mm sliced · water-based paint
PET acoustic backing
3/8 in. (≈9.5 mm) — Herringbone slats
±0.2 mm
Sealed back faceBalanced lamination
Herringbone slats — consistent panel to panel
Specifications

Technical data

Dimensions & coverage

Board width
24 in. (610 mm)
Board length
48 1/9 in. (1222 mm)
Board thickness
3/8 in. (≈9.5 mm)
Edge profile
Square edge
Coverage per carton
80.24 sq.ft / carton
Panels per carton
10

Materials & finish

Construction
Tech-wood veneer + black PET, water-based paint
Surface
Tech-wood veneer, 0.3 mm sliced — matte
Profile
Herringbone slat on PET backing
Core
Black PET acoustic backing
Colorway
Walnut
Warranty
5 yr residential / 2 yr commercial

Installation & application

Joint
Butt joint
Fixing method
Glue / Nail / Staple
Application
Interior walls & ceilings
Grade
On / Above
Use area
Indoor, dry areas (40–60% RH)
Acoustic performance
Noise reduction

Packing & logistics

Cartons per pallet
33
Pallets per container
18
Pallet height
49.21 in.
Box length
48.82 in.
Terms
FOB factory
Country of manufacture
Vietnam
Installation

Watch it go up

Glue, nail or staple — a two-person crew covers a full feature wall in an afternoon.

Installation video — YGPKJ122261009 Reserved video area (16:9). Drop your YouTube / Vimeo iframe here when the video is ready.
Plan & mark

Snap a level baseline and vertical guides at panel widths. Dry-fit a full row first.

Cut to size

Fine-tooth saw, face down. Leave a 5 mm expansion gap top and bottom.

Adhesive & fix

Zigzag adhesive on the back, press to wall, then brad-nail or staple every 300 mm into studs or furring.

Join panels

Edges meet square to square — a hairline joint is correct. Check flushness with a straight edge.

Finish

Fill fixings with color-matched filler, seal gaps with caulk or trim, wipe down.

Good to know

  • Let panels acclimatize flat for 24–48 h before install.
  • Fix into studs or furring at max. 400 mm centres.
  • Interior use only, dry areas. Indoor RH 40–60%.
Installation guide (PDF)
Downloads

Documents for your file

Everything your team and your customer need to specify this panel.

PDF

Product information sheet YGPKJ122261009

Full technical data for this SKU: dimensions, construction, packing, warranty and ordering notes.

Download PDF
PDF

Installation guide 2 pages

Tools, preparation, five-step installation for walls, ceiling notes and care instructions.

Download PDF